Add Row
Add Element
cropper
update
The Project Controls Daily
update
Add Element
  • Home
  • Categories
    • Cost Management
    • Schedule Management
    • Risk Management
    • Technology & Software
    • Certification & Career Development
    • ESG & Sustainable projects
    • Best Practices & Case Studies
    • Regulatory & Compliance
    • Leadership & Management
    • News & Trends
December 19.2025
3 Minutes Read

Could Smart Permitting and Phasing Out Diesel Generators Curb Data Center Impacts?

Data center construction at sunset highlighting emissions reduction.

Understanding the Impact of Data Centers on California's Environment

As data centers become overwhelmingly significant in today’s information-driven economy, their environmental footprints are raising concerns, particularly in regions like California. A recent report from the University of California at Riverside shows that despite an impressive clean energy output—around two-thirds of the state's electricity—California's data centers are causing a staggering increase in electricity use, water consumption, and air pollution.

Current Challenges: Escalating Demand and Regulations

According to the report, electricity consumption in California’s data centers surged by 95% between 2019 and 2023, with expectations of a jaw-dropping 356% increase projected by 2028. Such drastic consumption levels, which could equal the annual usage of 2.4 million households, signal a critical challenge both for sustainability and regulatory compliance. While the environmental footprint of data centers is gaining traction among policymakers, California lawmakers are struggling to keep up with these changes. Three proposals aimed at improving transparency in data center energy consumption were shelved, further complicating an already opaque situation.

Switching Gears: The Role of Smart Permitting

A proposed measure of 'smart permitting' could pave the way for more responsible data center development. By expediting the permitting process for data centers that comply with environmental standards—being energy-efficient and located in regions with abundant clean resources—government authorities can better manage the growth of data centers without sacrificing environmental integrity. This is crucial as the increase in carbon emissions contradicts California's ambitious climate objectives. The report estimates carbon emissions from data centers could leap from 2.38 million tons in 2023 to 5.56 million tons by 2028, increasing public health risks associated with air quality degradation.

The Diesel Generator Dilemma

Healthcare costs attributed to emissions from diesel generators supporting these data centers are also becoming alarming. Nearly 90% of California's data centers depend on these emergency power sources. While they fulfill critical functions during outages, their frequent operation contributes to significant local air pollution. The report reveals that costs related to health issues exacerbated by emissions jumped from about $45 billion in 2019 to an estimated $155 billion by 2023, projected to reach $267 billion by 2028. This mounting burden underlines the urgency for policymakers to rethink dependency on diesel and other fossil fuels.

Proactive Measures: A Path Forward

Industry experts advocate for urgent transformations within the sector to alleviate these burdens. As highlighted in the research, transitioning from diesel generators to more sustainable energy solutions and investing in renewable technologies could significantly reduce harmful emissions. Already, there's a burgeoning need for reporting standards that can effectively gauge the water and energy usage of data centers. Establishing robust compliance pathways and reducing reliance on pollution-heavy energy could set a solid precedent for sustainability.

Looking Ahead: Future of California's Data Centers

If California wishes to maintain its position as a leader in both technology and environmental sustainability, it's crucial to reevaluate the operational frameworks of its data centers. Policymakers must establish oversight mechanisms that reflect the realities of a rapidly evolving sector. The state's experience serves as a laboratory for innovative practices that could ultimately serve as a model for other regions—balancing high-demand technological growth with responsible and sustainable environmental stewardship.

Technology & Software

0 Views

0 Comments

Write A Comment

*
*
Related Posts All Posts
12.19.2025

Discover How AI Can Prevent Workplace Fires in 2025

Update Why Are Workplace Fires Still Occurring in 2025? In the face of numerous advancements in technology and strict safety regulations, workplace fires continuing to make headlines in 2025 is alarming. These incidents typically unfold in high-risk areas like manufacturing plants and construction sites, where fire safety measures appear inadequate due to evolving risks. Understanding Modern Risks and Limitations Recent incidents reveal that fire hazards are no longer just a byproduct of outdated equipment or careless practices. For example, a fire event in a Hong Kong construction site pointed towards gaps in monitoring temporary electric setups and following safety protocols. The rapid escalation of this fire emphasizes that older systems can be ill-equipped for contemporary environments filled with complex materials and situations. The Shift from Reactive to Proactive Fire Management To curb these risks, there’s an urgent need for innovative solutions like AI-powered fire detection systems. Unlike conventional smoke alarms that activate only when smoke is present, AI systems utilize deep learning to identify and predict fire hazards before they escalate. They offer a smarter response mechanism that could drastically lower the chances of fire-related incidents by detecting thermal anomalies and poor worker practices. Examining Persistent Fire Accident Causes Data suggests a variety of reasons why workplace fires remain a pressing issue even in sophisticated environments: Delayed Detection: Many fires start as small thermal anomalies that conventional alarms and human oversight may not catch until it's too late. Hidden Ignition Sources: The cluttered organization of modern job sites can create ignition sources that remain undetected until severe damage occurs. Unsafe Worker Behaviors: Even vigilant protocols cannot eliminate risky behaviors, such as improper storage of flammable materials. Transforming Expectations with AI in Fire Safety AI systems can reinterpret traditional fire safety measures through their ability to provide real-time monitoring and predictive analyses. For example, AI can analyze past incidents to predict future risks, determining effective evacuation routes and ensuring the infrastructure remains prepared for potential emergencies. Such advancements mark a significant shift towards a comprehensive understanding of fire safety. The Financial and Social Implications of Fires It's essential to recognize the toll that fires take on organizations. Industrial fires result in approximately $1.5 billion in direct property damage per year in the U.S. alone. AI technologies help counteract these costs by reducing incidents and increasing safety. By investing in cutting-edge fire prevention systems, companies not only protect their assets but also enhance employee welfare, thereby creating a safer workplace culture. Conclusion: The Call to Action Relying on traditional fire safety measures isn’t sustainable for modern workplaces. As we navigate through 2025, integrating AI technology into fire safety practices can change the conversation from reactive emergency responses to proactive safety management. For project control managers and risk managers, now is the time to advocate for adopting AI-driven solutions that safeguard both lives and property. Don’t wait for an incident to occur; explore how implementing these technologies can provide peace of mind and protect your workplace.

12.18.2025

The Future of Building: How Swinerton's New Mass Timber Facility Will Shape the Industry

Update Mass Timber Manufacturing: A Leap Into the Future The construction industry is on the cusp of a transformative era with the establishment of a new mass timber manufacturing facility by Swinerton and Timberlab in Millersburg, Oregon. Set to become one of the largest cross-laminated timber (CLT) plants in the United States, this initiative not only highlights sustainable construction practices but also heralds a future where eco-friendly materials lead the way in building innovations. Turning Concepts Into Reality: Independence Hall Spanning an impressive 192,000 square feet—approximately the length of three football fields—Independence Hall is designed to produce 7 to 9 million square feet of CLT annually. With a production range from 2 to 12 inches thick, this facility is not just an architectural marvel but a testament to the potential of mass timber in reducing our carbon footprint by utilizing renewable resources effectively. Expected to open its doors in early 2027, the factory will also create around 100 jobs, with an average compensation of $80,000, further aiming to stimulate local economic growth. The Role of Technology in Sustainable Construction One of the standout features of the manufacturing process is the integration of cutting-edge technology such as the creation of a digital twin of the facility. This innovative approach allows for better visualization and planning, ensuring that all aspects of the construction are streamlined and efficient. As Swinerton demonstrates, the application of Building Information Modeling (BIM) and Autodesk Construction Cloud facilitates precise coordination across various trades, a critical factor in contemporary construction projects. This digital transformation not only enhances speed but also reduces waste—a win-win for the environment and project timelines alike. Incorporating Local Resources True to its commitment to sustainability, many materials utilized in the building process are locally sourced from Oregon, including Douglas Fir lumber. By harnessing resources available in the region, the project supports local forestry industries while minimizing transportation emissions, aligning with broader environmental goals. Mass Timber: A Growing Trend As mass timber garners increasing interest among developers and architects, driven largely by its environmental benefits and structural advantages comparable to steel, the industry is adapting. Organizations are investing in training programs for workers, ensuring that they are equipped to construct with this versatile material. Expectations indicate that mass timber could become the go-to choice for future projects, integrating seamlessly into urban landscapes while promoting sustainability. The Road Ahead: Future Predictions and Insights As we approach 2027, the successful launch of the Independence Hall facility may set a precedent for mass timber manufacturing nationwide. The ongoing developments signal a shift in institutional attitudes towards sustainability in construction. Expect this trend to empower more businesses to adopt eco-friendly practices, ultimately staggering the construction industry's reliance on traditional, more carbon-intensive materials. As project managers, cost engineers, and other industry professionals, recognizing these changes is essential for sustainable decision-making and implementation within organizations. By understanding the market dynamics surrounding mass timber and staying ahead of technological trends, professionals can better navigate the future landscape of construction. To gain deeper insights and adapt to the rapidly evolving construction sector, professionals are encouraged to engage with industry resources, training, and advocacy groups focusing on mass timber technologies. Collaborating with industry leaders like Swinerton and Timberlab will further solidify our push towards sustainable building solutions. Your Part in This Transformation Embrace the trends shaping the future of construction. Whether it's through implementing new technologies or supporting sustainable practices within your organization, every effort contributes to a larger movement toward a greener construction industry.

12.18.2025

Suffolk's BOOST Demo Day Showcases Exciting Contech Innovations for 2025

Update The Future of Construction Technology at Suffolk's BOOST Demo DayOn November 20, 2025, Suffolk Technologies hosted its sixth BOOST Demo Day, emphasizing the intersection of innovation and construction. This event attracted investors, industry experts, and stakeholders eager to witness the latest advances from an array of promising startups in the construction technology (contech) sector.Introducing the BOOST 6 CohortThis year's cohort featured eight startups, each addressing critical challenges in construction through innovative technologies. The selected companies included ARKI, offering design systems to accelerate project completion, and Cyphra Autonomy, which utilizes robotics for efficient material movement on job sites.The Shift Towards Robotics and AI in ConstructionAs highlighted by industry experts at the event, robotics in construction is rapidly evolving. Robot applications have tripled within this cohort, signaling a shift in focus from software to hardware solutions. Founders are increasingly drawn to robotics as a robust alternative, demonstrating that these technologies can enhance labor efficiency rather than replace human workers. This approach not only aims to heighten productivity but also to maintain safety on job sites, allowing workers to concentrate on high-value tasks.A Diverse Range of Innovative SolutionsThe BOOST cohort's innovations spanned various aspects of construction:Dig Energy introduced geothermal drilling technology that optimizes costs and enhances thermal efficiency.Hardline presented a voice-first tool for accurate record-keeping and decision documentation in construction.Neuron Factory developed an AI platform focused on increasing accuracy in project estimations and planning during preconstruction phases.Ouros Materials showcased fire-resistant composites created from captured carbon dioxide, emphasizing sustainability.Each startup not only receives funding but also gains valuable experience by testing their solutions on active Suffolk construction sites.Building Networks and PartnershipsSuffolk leveraged its extensive network of 55 partner organizations to create meaningful connections for the BOOST participants. These collaborations offer startups client access, project pilots, and mentoring from seasoned industry professionals. Notably, 28 partners included construction firms directly involved in pilot projects with BOOST startups, illustrating a commitment to integrating tech innovations with real-world applications.Market Trends and Future PredictionsThe construction sector is undergoing significant change, fueled by technological advancement and an increasing demand for efficiency. The attention on AI and robotics isn’t just a trend; it represents a fundamental transformation in how construction will operate in the near future. Suffolk's approach illustrates that successful integration of technology can lead to safer, more productive job sites, which could ultimately reshape contractor-client relationships.Key Challenges and Opportunities AheadDespite growing enthusiasm for these technologies, substantial hurdles remain for those looking to pioneer new solutions in construction. The industry’s conservative nature means many are hesitant to adopt untested innovations in critical situations where human lives are at stake. Making a persuasive case for emerging materials and techniques will be essential, requiring both successful pilot projects and rigorous testing protocols.One noteworthy takeaway from the discussions: the importance of collaboration within the industry as firms recognize that true innovation often stems from collective effort rather than isolated trials.Our Call to ActionThe outcomes of Suffolk’s Demo Day show a clear trend: innovation in construction technology is gaining momentum. As industry professionals, it’s essential for us to stay informed and engaged with these emerging technologies. By supporting startups and advocating for the adoption of innovative practices, we can contribute to a more efficient and sustainable future in construction.

Terms of Service

Privacy Policy

Core Modal Title

Sorry, no results found

You Might Find These Articles Interesting

T
Please Check Your Email
We Will Be Following Up Shortly
*
*
*